Where is the chlorine probe mounted?

Chlorine is heavier than air and turns to acid mist. Heads at cylinder cabinets, evaporators and the operator’s breathing zone — off the splash. High alarm stops dosing and starts emergency extract.

Typical range 0–10 ppm. Use the local OEL, not a refinery LEL sheet. IP66 in wet rooms.

The indoor installation distance should not be greater than the leakage source1meters, and the outdoor installation distance should not be greater than the leakage source2m; The installation position should be downwind of the leak point. Depending on the specific gravity of the chlorine, the probe is mounted below ground level30Centimeter.

Back to the list

Hotline
Pre-sales: 13241121312
After-sales: 010-84932407
WeChat
WeChat ID: 13241121312
Scan to add us on WeChat
Back to top