Honeywell Searchpoint Optima Plus 04200-A-1070 – Identification: Optima Plus Stainless Steel Label / Warning Placard
04200-A-1070 is a Searchpoint Optima Plus Identification: Optima Plus Stainless Steel Label / Warning Placard. It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
04200-A-1070 is a Identification; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus Stainless Steel Label / Warning Placard | 04200-A-1070 |
| Class | Accessory | Identification |
Technical specifications
| Category | Accessory / Identification |
|---|---|
| Description | Optima Plus Stainless Steel Label / Warning Placard |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep 04200-A-1070 on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
04200-A-1070 is Searchpoint Optima Plus Identification. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use 04200-A-1070 against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0290 | Identification | — | — | — |
| OPTIMATAG | Identification | — | — | — |
Installation and service
Isolate power before swapping 04200-A-1070. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Lead time?
- Lot-based. Do not substitute a look-alike OPTIMA* SKU without matching the part number.
- Orientation?
- Avoid contamination/condensation on the optics per the manual.
- Rescale on site?
- Follow the manual/ordered config; re-order if needed.
- Spares?
- Use the family matrix; do not mix other IR-platform parts.
- Enquiry?
- Quote full P/N 04200-A-1070 plus approval/interface.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N 04200-A-1070, gas/range and approval.