Honeywell Searchpoint Optima Plus OPTIMACABLEGLANDM20 – Hardware: Optima Plus M20 Cable Gland Kit (pack of 2)
OPTIMACABLEGLANDM20 is a Searchpoint Optima Plus Hardware: Optima Plus M20 Cable Gland Kit (pack of 2). It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
OPTIMACABLEGLANDM20 is a Hardware; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus M20 Cable Gland Kit (pack of 2) | OPTIMACABLEGLANDM20 |
| Class | Spare | Hardware |
Technical specifications
| Category | Spare / Hardware |
|---|---|
| Description | Optima Plus M20 Cable Gland Kit (pack of 2) |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep OPTIMACABLEGLANDM20 on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
OPTIMACABLEGLANDM20 is Searchpoint Optima Plus Hardware. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use OPTIMACABLEGLANDM20 against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0266 | Hardware | — | — | — |
| 2108B0267 | Hardware | — | — | — |
| 2108B0268 | Hardware | — | — | — |
| 2108B0269 | Hardware | — | — | — |
| 2108B0295 | Hardware | — | — | — |
| 2108B0296 | Hardware | — | — | — |
| OPTIMACABLEGLANDNPT | Hardware | — | — | — |
Installation and service
Isolate power before swapping OPTIMACABLEGLANDM20. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Vs Searchline Excel?
- Optima is point IR; Excel is open-path.
- Which line is OPTIMACABLEGLANDM20?
- Honeywell Searchpoint Optima Plus point IR flammable detector.
- Enquiry?
- Quote full P/N OPTIMACABLEGLANDM20 plus approval/interface.
- Typical output?
- Often 4–20 mA — confirm by ordered configuration.
- Relation to XCD?
- Same vendor family of fixed detectors, different platforms/P/Ns.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N OPTIMACABLEGLANDM20, gas/range and approval.