Honeywell Searchpoint Optima Plus OPTIMACONDUITKIT – Installation: Optima Plus Conduit Sealing Kit (for hazardous area conduit entry)
OPTIMACONDUITKIT is a Searchpoint Optima Plus Installation: Optima Plus Conduit Sealing Kit (for hazardous area conduit entry). It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
OPTIMACONDUITKIT is a Installation; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus Conduit Sealing Kit (for hazardous area conduit entry) | OPTIMACONDUITKIT |
| Class | Accessory | Installation |
Technical specifications
| Category | Accessory / Installation |
|---|---|
| Description | Optima Plus Conduit Sealing Kit (for hazardous area conduit entry) |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep OPTIMACONDUITKIT on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
OPTIMACONDUITKIT is Searchpoint Optima Plus Installation. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use OPTIMACONDUITKIT against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0291 | Installation | — | — | — |
| OPTIMAEARTHKIT | Installation | — | — | — |
| OPTIMASPACER | Installation | — | — | — |
Installation and service
Isolate power before swapping OPTIMACONDUITKIT. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Spares?
- Use the family matrix; do not mix other IR-platform parts.
- Calibrate after fitting?
- Zero and span after window, lamp or detector swaps. Brackets and tags do not need gas.
- Enquiry?
- Quote full P/N OPTIMACONDUITKIT plus approval/interface.
- Can I fit an XCD/XNX spare instead of OPTIMACONDUITKIT?
- No. Optima optics, seals and connectors are unique.
- Relation to XCD?
- Same vendor family of fixed detectors, different platforms/P/Ns.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N OPTIMACONDUITKIT, gas/range and approval.