Honeywell Searchpoint Optima Plus OPTIMASENSORHEAD – Assembly: Optima Plus Complete Sensor Head Assembly (includes source,detector,optics)
OPTIMASENSORHEAD is a Searchpoint Optima Plus Assembly: Optima Plus Complete Sensor Head Assembly (includes source,detector,optics). It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
OPTIMASENSORHEAD is a Assembly; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus Complete Sensor Head Assembly (includes source,detector,optics) | OPTIMASENSORHEAD |
| Class | Spare | Assembly |
Technical specifications
| Category | Spare / Assembly |
|---|---|
| Description | Optima Plus Complete Sensor Head Assembly (includes source,detector,optics) |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep OPTIMASENSORHEAD on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
OPTIMASENSORHEAD is Searchpoint Optima Plus Assembly. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use OPTIMASENSORHEAD against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0274 | Assembly | — | — | — |
Installation and service
Isolate power before swapping OPTIMASENSORHEAD. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Calibration tip?
- Use certified gas and keep the optical window clean.
- Which line is OPTIMASENSORHEAD?
- Honeywell Searchpoint Optima Plus point IR flammable detector.
- Typical output?
- Often 4–20 mA — confirm by ordered configuration.
- Lead time?
- Lot-based. Do not substitute a look-alike OPTIMA* SKU without matching the part number.
- Calibrate after fitting?
- Zero and span after window, lamp or detector swaps. Brackets and tags do not need gas.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N OPTIMASENSORHEAD, gas/range and approval.