Honeywell Searchpoint Optima Plus SHC-1 – Tool: Honeywell SHC-1 Smart Handheld Communicator for Optima Plus
SHC-1 is a Searchpoint Optima Plus Tool: Honeywell SHC-1 Smart Handheld Communicator for Optima Plus. It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
SHC-1 is a Tool; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Honeywell SHC-1 Smart Handheld Communicator for Optima Plus | SHC-1 |
| Class | Accessory | Tool |
Technical specifications
| Category | Accessory / Tool |
|---|---|
| Description | Honeywell SHC-1 Smart Handheld Communicator for Optima Plus |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep SHC-1 on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
SHC-1 is Searchpoint Optima Plus Tool. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use SHC-1 against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0286 | Tool | — | — | — |
| SHC-1-CABLE | Tool | — | — | — |
| SHC-1-CHARGER | Tool | — | — | — |
| OPTIMACOMMISSIONKIT | Tool | — | — | — |
Installation and service
Isolate power before swapping SHC-1. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Calibrate after fitting?
- Zero and span after window, lamp or detector swaps. Brackets and tags do not need gas.
- Documents?
- Spec/manual links on the SKU pages.
- Rescale on site?
- Follow the manual/ordered config; re-order if needed.
- Calibration tip?
- Use certified gas and keep the optical window clean.
- Spares?
- Use the family matrix; do not mix other IR-platform parts.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N SHC-1, gas/range and approval.