| Item | Value |
|---|---|
| Measured gases | |
| Measuring range | |
| Detection principle | infrared |
| Accuracy | |
| Resolution | |
| Response time | |
| Ingress protection | |
| Explosion protection | |
| Operating temperature | -40~+185°F(-40~+85℃) |
| Power supply | 18~28VDC, rated at 24VDC |
| Output signal |
FS SYSTEM 10TM is a high-speed, microprocessor-based fire detection and process control system. Designed for liquid and powder coating applications, it quickly detects flames and stops the electrostatic coating process in milliseconds when flames are detected; It also effectively interrupts the fire before residue and the wetting paint ignite.
FS SYSTEM 10TM is the only system that provides a two-stage response: the 'Warning' level is suitable for gun "fireball" type fires; If the fire continues to spread, the "Fire Alarm" level will alarm within 4~5 seconds. The FS SYSTEM 10TM flame detector has an electro-optical quantum infrared sensor matrix and can accurately detect fire conditions and false alarms, so its performance is significantly better than conventional detectors. The FS SYSTEM 10TM is available in a wall-mounted controller configuration (please consult the manufacturer for specific information on the card controller).
● Multispectral infrared flame detector;
● Meets NFPA 33 requirements (NFPA: National Fire Protection Association);
● Unique two-level "warning" and "fire alarm" response;
● No fault alarm caused by arc discharge and corona discharge;
● Built-in automatic "internal photometric" self-test;
● Do not be sensitive to local radiation energy sources such as paint heaters and cause false alarms;
● Not affected by the inhalation of flue gas or paint solvent aerosol in the liquid painting booth;
● Not affected by paint, powder and residual oil on the lens;
● Use RS-485 interface for digital communication;
● FirePic™: Realize the retrieval of historical fire archive data;
● SnapShot™: Dynamic graphical display of the detector detection.
Technical specifications - Wall mounted controller
Shell
NEMA 12 wall-mounted stainless steel cabinet
Display and indication
24-character backlit LCD
LED status indicator
Built-in speaker
Input power
18~28VDC, rated at 24VDC
120V DC with optional kit
Power consumption
Normal: 200mA at 24V DC
Alarm situation: 180mA at 24V DC
Relay output
Early warning: single knife double throw, passive contact;
Warning: single blade double throw, passive contact;
Fire alarm: single knife double throw, passive contact;
Fault: single pole double throw, active contact;
Process control: (3) Single pole double throw, active contact
Relay Contact Rating:
Process control: 10A@ 24VDC
All other relays: 1A @24VDC
Under normal working conditions, the process control and fault relay are both active output
All its relays are passive output.
Operating temperature
+32~+122°F (0~+50°C)
Electrical connections
RS-485 interface, using a shielded four-core cable FireBus loop
FirePicTM
There are 6 in total, 8 seconds per cycle
Event history
Two detectors, 200 strips
detector
1~2 detectors per controller
Technical specifications - detector
Sensitivity
4.5 m standard sensitivity
Available in 9 m and 14 m sensitivity. Please declare this when ordering
Response time
Warning 0.3 seconds
Warning 0.5 seconds
Alarm for 4 seconds
Field of view
90° range (horizontal and vertical)
weight
3.8 lbs (1.7 kg)
Temperature range
-40~+185°F(-40~+85℃)
shell
Cast aluminum
Ingress protection is NEMA 4
Electrical rating
Class I, Div. 1 and 2, Groups B, C and D
Spectral sensitivity
Near-infrared: 700 to 1100nm
Broadband IR: 700 to 3500nm
Visible light: 400 to 700nm
Ordering information
FS10-OPTION-1-GF
Wall mount controller with two detectors
FS10-OPTION-1S-GF
Wall mounted controller with a detector
SM2
Swivel mounting bracket
FS-846
Test light
DPC-12
Disposable protective cover
DASA 1-P
Weather shield
● Liquid painting production line
● Aerosol filling
● Powder coating room
● Transformer room
● Diesel engine and gas compressor stations
● Boiler room