| Item | Value |
|---|---|
| Measured gases | |
| Measuring range | Display value range: -1999~9999 |
| Detection principle | |
| Accuracy | |
| Resolution | |
| Response time | |
| Ingress protection | |
| Explosion protection | |
| Operating temperature | -10℃～65℃ |
| Power supply | 220V |
| Output signal | Output contact capacity: 250V AC, 3A |
HT-8A eight-channel alarm control host
How data is displayed in real time on the Internet
The alarm control host is used in conjunction with the alarm detector, in addition to receiving the signal of the gas detection detector, and when the measured value reaches the set alarm value, the control host emits sound and light alarms, and at the same time outputs the control signal (switching contact output), prompting the operator to take safety treatment measures in time, or automatically starting the pre-connected control equipment.
It's okayOn this basisWith our companydevelopmentofData center software and WEBinterfacesoftware, using GPRS/3G DTU to upload meter data to the central server, so as to realize real-time display of meter data on the Internet.MaxFeatures:Data Internet display in real time，Mobile App alarm and real-time viewing，It can be connected to a variety of sensors or transmitters such as temperature, humidity, and pressure。
Featured extensions
l Internet real-time display, no need for complicated settings, plug and play;
l Mobile APP alarm monitoring and display;
l Connect to the computer to set all parameters with one click, monitor and store the computer in real time, and support secondary development.
Key features:
● High precision, error less than 0.2% F.S, good anti-interference ability;
● Receiving standard signal: 4-20mA, 485 optional;
● One-channel and multi-channel types can be selected and customized, up to 99 channels;
● Alarm points and all parameters can be set by button;
● Each channel has two alarm (switching quantity) outputs;
● It can set low limit, high limit, or upper limit or lower limit alarm, with delay alarm function;
● It can be connected to a two-wire or three-wire probe, and can provide 24V power supply to the probe;
● The data of the detection probe can be corrected, and the zero point can be adjusted remotely;
● Optional RS485/232 communication function, set all parameters through computer, and carry out real-time monitoring and communication.
Technical indicators
Power source: 220V±10%, power consumption is less than 2*number of channels
Working environment: -10°C~65°C, humidity less than 90%R.H
Display range: -1999~9999, decimal point position can be set
Input signal: typical value input 4mA~20mA
Alarm output: Output contact capacity: 250V AC, 3A
Basic error: less than ±0.2% F.S
Display Resolution: 1/9999
Measurement control cycle: up to 100ms per channel
There is no Product highlights.
There is no technical parameter expansion description.
It is suitable for industrial safety monitoring and on-site inspection scenarios.