Honeywell Searchpoint Optima Plus OPTIMADETECTOR – Electronics: Optima Plus IR Detector Assembly Replacement Kit
OPTIMADETECTOR is a Searchpoint Optima Plus Electronics: Optima Plus IR Detector Assembly Replacement Kit. It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
OPTIMADETECTOR is a Electronics; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus IR Detector Assembly Replacement Kit | OPTIMADETECTOR |
| Class | Spare | Electronics |
Technical specifications
| Category | Spare / Electronics |
|---|---|
| Description | Optima Plus IR Detector Assembly Replacement Kit |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep OPTIMADETECTOR on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
OPTIMADETECTOR is Searchpoint Optima Plus Electronics. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use OPTIMADETECTOR against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0262 | Electronics | — | — | — |
| 2108B0263 | Electronics | — | — | — |
| 2108B0264 | Electronics | — | — | — |
| 2108B0265 | Electronics | — | — | — |
| 2108B0270 | Electronics | — | — | — |
| OPTIMALAMP | Electronics | — | — | — |
| OPTIMAMAINPCB | Electronics | — | — | — |
Installation and service
Isolate power before swapping OPTIMADETECTOR. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Can I fit an XCD/XNX spare instead of OPTIMADETECTOR?
- No. Optima optics, seals and connectors are unique.
- Calibration tip?
- Use certified gas and keep the optical window clean.
- Relation to XCD?
- Same vendor family of fixed detectors, different platforms/P/Ns.
- Documents?
- Spec/manual links on the SKU pages.
- Housing/approval?
- Match Ex and material requirements to the P/N.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N OPTIMADETECTOR, gas/range and approval.