Honeywell Searchpoint Optima Plus OPTIMALAMP – Electronics: Optima Plus IR Lamp Assembly Replacement Kit
OPTIMALAMP is a Searchpoint Optima Plus Electronics: Optima Plus IR Lamp Assembly Replacement Kit. It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
OPTIMALAMP is a Electronics; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus IR Lamp Assembly Replacement Kit | OPTIMALAMP |
| Class | Spare | Electronics |
Technical specifications
| Category | Spare / Electronics |
|---|---|
| Description | Optima Plus IR Lamp Assembly Replacement Kit |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep OPTIMALAMP on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
OPTIMALAMP is Searchpoint Optima Plus Electronics. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use OPTIMALAMP against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0262 | Electronics | — | — | — |
| 2108B0263 | Electronics | — | — | — |
| 2108B0264 | Electronics | — | — | — |
| 2108B0265 | Electronics | — | — | — |
| 2108B0270 | Electronics | — | — | — |
| OPTIMADETECTOR | Electronics | — | — | — |
| OPTIMAMAINPCB | Electronics | — | — | — |
Installation and service
Isolate power before swapping OPTIMALAMP. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Which line is OPTIMALAMP?
- Honeywell Searchpoint Optima Plus point IR flammable detector.
- Will OPTIMALAMP detect gas by itself?
- No. OPTIMALAMP is a Electronics (Optima Plus IR Lamp Assembly Replacement Kit) and needs an Optima Plus detector body.
- Can I fit an XCD/XNX spare instead of OPTIMALAMP?
- No. Optima optics, seals and connectors are unique.
- Orientation?
- Avoid contamination/condensation on the optics per the manual.
- Which detector does OPTIMALAMP mate with?
- New builds: current 2108N SKUs such as 2108N4000N. Installed base: read the 2108B/2108N nameplate first.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N OPTIMALAMP, gas/range and approval.