Honeywell Searchpoint Optima Plus OPTIMAGLANDPLUGM20 – Hardware: Optima Plus M20 Blanking Plug (pack of 5)
OPTIMAGLANDPLUGM20 is a Searchpoint Optima Plus Hardware: Optima Plus M20 Blanking Plug (pack of 5). It is not a gas detector body and will not detect LEL on its own. Order this SKU for maintenance, calibration or mounting; the head remains a 2108N transmitter number.
OPTIMAGLANDPLUGM20 is a Hardware; see same-class SKUs in the matrix.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| P/N | Optima Plus M20 Blanking Plug (pack of 5) | OPTIMAGLANDPLUGM20 |
| Class | Spare | Hardware |
Technical specifications
| Category | Spare / Hardware |
|---|---|
| Description | Optima Plus M20 Blanking Plug (pack of 5) |
| Gas | — |
| Output | — |
| Approvals | see description |
| Entries | — |
| Enclosure | — |
| RGC | — |
| Principle | Point IR (dual source, dual beam) |
| Range | — |
| Ingress | 随本体 |
Why this part number
Keep OPTIMAGLANDPLUGM20 on its own BOM line so windows, lamps, PCBs, glands and brackets can be replaced on their own cycle. Do not bury it under 2108N4000N, and do not fit XCD or XNX spares on Optima optics.
Spares and mates
OPTIMAGLANDPLUGM20 is Searchpoint Optima Plus Hardware. This SKU is a spare or accessory and needs an Optima Plus detector. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Use OPTIMAGLANDPLUGM20 against installed Optima Plus points: dust barriers after deluge, flow housings on extractive loops, cups and cylinders at annual gas. Match the detector thread (M20 vs NPT) before the box ships.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108B0266 | Hardware | — | — | — |
| 2108B0267 | Hardware | — | — | — |
| 2108B0268 | Hardware | — | — | — |
| 2108B0269 | Hardware | — | — | — |
| 2108B0295 | Hardware | — | — | — |
| 2108B0296 | Hardware | — | — | — |
| OPTIMACABLEGLANDM20 | Hardware | — | — | — |
Installation and service
Isolate power before swapping OPTIMAGLANDPLUGM20. Refit seals to the specified torque and keep M20/M25/NPT families apart. Zero and span afterwards; keep fingerprints and condensation off the optics.
FAQ
- Housing/approval?
- Match Ex and material requirements to the P/N.
- Relation to XCD?
- Same vendor family of fixed detectors, different platforms/P/Ns.
- Lead time?
- Lot-based. Do not substitute a look-alike OPTIMA* SKU without matching the part number.
- Enquiry?
- Quote full P/N OPTIMAGLANDPLUGM20 plus approval/interface.
- Spares?
- Use the family matrix; do not mix other IR-platform parts.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N OPTIMAGLANDPLUGM20, gas/range and approval.