Substitute the PID lamp?

No. DigiPID needs the specified MARK2 10.6 eV lamp and PTFE O-ring.

3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.

Where are correction factors?

The hub shows typical gases from the TVOC Basic Gas Table. The 1–1000 ppm DigiPID has no CFs.

Photoionization PID at 10.6 eV — not IR, not catalytic.

Hub pages link CN/EN specs, manuals and FAQ packs.

F08-0004-000 | RAEGuard 2 PID Accessory

Name: F08-0004-000 | RAEGuard 2 PID Accessory
Brand: RAE
SKU: F08-0004-000
Availability: BackOrder

F08-0004-000 is a RAEGuard 2 PID accessory: RAEPoint, RRA2000, ATEXIECEX For RAEGuard 2 PID, REMOTE, RM2400A, 2.4GHz. It does not measure VOC by itself.

English-list hub: product-9019. China-list hub: product-8017. Each part number has a single HTML file.

Request quote for this P/N Family matrix Open RAEGuard 2 PID product page

F08-0004-000 RAEPoint, RRA2000, ATEXIECEX For RAEGuard 2 PID, REMOTE, RM2400A, 2.4GHz — RAEGuard 2 PID · F08-0004-000

Part-number decode

Segment	Meaning	This SKU
Family	RAEGuard 2 PID / FGM-200X	F08
Type	Instrument / accessory / consumable / spare	Accessory
English-list group	Instrument / Accessories / Consumables & Spares	Accessories
This SKU	RAEPoint, RRA2000, ATEXIECEX For RAEGuard 2 PID, REMOTE, RM2400A, 2.4GHz	F08-0004-000

Technical specifications

Category	Accessory
Group	Accessories
Description	RAEPoint, RRA2000, ATEXIECEX For RAEGuard 2 PID, REMOTE, RM2400A, 2.4GHz
Mates to	RAEGuard 2 PID / product-9019
Note	Accessories and spares are not detectors.

Why this part number

Specify F08-0004-000 for mounting, weather protection or communications. Order the instrument kit separately.

What it mates with

F08-0004-000 belongs to Accessories. This SKU is an accessory, consumable or spare.

Typical applications

Field install or signal expansion with a RAEGuard 2 PID transmitter.

Selection contrast

P/N	Type	Description
033-3032-000	Accessory	Magnet Key, RAEGuard and RAEGuard 2
490-0130-000	Accessory	TOOL, M6 HEX KEY, BM-564C, RAEGuard
490-0804-000	Accessory	PLASTIC HOSE CLAMP, BLACK, DIAMETER 39.5M
490-3039-000	Accessory	PLUG, 3/4" NPT, Aluminium, ATEX & CSA Certified
94000-C-1049	Accessory	RAEGuard 2 PID 2 Pipe Mount Kit
D03-2021-000	Accessory	WATERPROOF SLEEVE, RAEGUARD 2 PID
D03-2022-000	Accessory	DOUBLE FILTER, 30-37MM

Family matrix

Installation and service

Inspect flamepaths and threads before fitting F08-0004-000. Isolate power in the hazardous area.

FAQ

Substitute the PID lamp?: No. DigiPID needs the specified MARK2 10.6 eV lamp and PTFE O-ring.
Outputs?: 3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.
Where are correction factors?: The hub shows typical gases from the TVOC Basic Gas Table. The 1–1000 ppm DigiPID has no CFs.
Detection principle?: Photoionization PID at 10.6 eV — not IR, not catalytic.
Documents?: Hub pages link CN/EN specs, manuals and FAQ packs.

Documents

English datasheet · Combined Manual Rev H · TVOC gas table · product-9019 · product-8017

Availability and enquiry

Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N F08-0004-000, gas/range and approval.

Request quote for this P/N