Where are correction factors?

The hub shows typical gases from the TVOC Basic Gas Table. The 1–1000 ppm DigiPID has no CFs.

3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.

Diffusion vs Flow Through?

Do not mix weather/pretreatment/dryer kits; those are Flow Through only.

Hub pages link CN/EN specs, manuals and FAQ packs.

Photoionization PID at 10.6 eV — not IR, not catalytic.

Name: 600-0002-000 | RAEGuard 2 PID Consumable
Brand: RAE
SKU: 600-0002-000
Availability: BackOrder

600-0002-000 is a RAEGuard 2 PID consumable or spare: Isobutylene 100ppm 34L. It needs a detector kit.

English-list hub: product-9019. China-list hub: product-8017. Each part number has a single HTML file.

Segment	Meaning	This SKU
Family	RAEGuard 2 PID / FGM-200X	600
Type	Instrument / accessory / consumable / spare	Consumable
English-list group	Instrument / Accessories / Consumables & Spares	Consumables and Spares
This SKU	Isobutylene 100ppm 34L	600-0002-000

Category	Consumable
Group	Consumables and Spares
Description	Isobutylene 100ppm 34L
Mates to	RAEGuard 2 PID / product-9019
Note	Accessories and spares are not detectors.

Order 600-0002-000 to match DigiPID / host parts. Do not substitute a non-MARK2 10.6 eV lamp.

600-0002-000 belongs to Consumables and Spares. This SKU is an accessory, consumable or spare.

600-0002-000 is used for calibration, lamp/filter service or module repair.

P/N	Type	Description
033-3034-000	Consumable	ASSY, FILTER (D50MMX0.22UM)
033-3035-000	Consumable	DigiPID external dust pre-filter
050-0061-001	Consumable	DigiPID MARK2 lamp, 10.6 ev, 1/2"
081-0017-000	Consumable	Kit, Lamp Cleaning (cleaning solution: Isopropanol)Note: The recommended cleaning fluid Is
081-0018-C00	Consumable	KIT, AIR DRYING PRE-FILTER, CHINA
430-B076-060	Consumable	O-RING, 100.6X95X2.8, NBR, BLACK
490-0011-000	Consumable	EXTERNAL FILTER, 37MM, 0.45UM PTFE

Isolate power. Fit the lamp with PTFE O-ring 430-0014-001. Replace water traps and dust filters on the manual interval.

Where are correction factors?: The hub shows typical gases from the TVOC Basic Gas Table. The 1–1000 ppm DigiPID has no CFs.
Outputs?: 3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.
Diffusion vs Flow Through?: Do not mix weather/pretreatment/dryer kits; those are Flow Through only.
Documents?: Hub pages link CN/EN specs, manuals and FAQ packs.
Detection principle?: Photoionization PID at 10.6 eV — not IR, not catalytic.

Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N 600-0002-000, gas/range and approval.