C01-0001-R00 | RAEGuard 2 PID Consumable
C01-0001-R00 is a RAEGuard 2 PID consumable or spare: DigiPID sensor module, Russia, 0.01 - 100 ppm isobutylene equivalent. It needs a detector kit.
English-list hub: product-9019. China-list hub: product-8017. Each part number has a single HTML file.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | RAEGuard 2 PID / FGM-200X | C01 |
| Type | Instrument / accessory / consumable / spare | Consumable |
| English-list group | Instrument / Accessories / Consumables & Spares | Consumables and Spares |
| This SKU | DigiPID sensor module, Russia, 0.01 - 100 ppm isobutylene equivalent | C01-0001-R00 |
Technical specifications
| Category | Consumable |
|---|---|
| Group | Consumables and Spares |
| Description | DigiPID sensor module, Russia, 0.01 - 100 ppm isobutylene equivalent |
| Mates to | RAEGuard 2 PID / product-9019 |
| Note | Accessories and spares are not detectors. |
Why this part number
Order C01-0001-R00 to match DigiPID / host parts. Do not substitute a non-MARK2 10.6 eV lamp.
What it mates with
C01-0001-R00 belongs to Consumables and Spares. This SKU is an accessory, consumable or spare.
Typical applications
C01-0001-R00 is used for calibration, lamp/filter service or module repair.
Selection contrast
| P/N | Type | Description |
|---|---|---|
| 033-3034-000 | Consumable | ASSY, FILTER (D50MMX0.22UM) |
| 033-3035-000 | Consumable | DigiPID external dust pre-filter |
| 050-0061-001 | Consumable | DigiPID MARK2 lamp, 10.6 ev, 1/2" |
| 081-0017-000 | Consumable | Kit, Lamp Cleaning (cleaning solution: Isopropanol)Note: The recommended cleaning fluid Is |
| 081-0018-C00 | Consumable | KIT, AIR DRYING PRE-FILTER, CHINA |
| 430-B076-060 | Consumable | O-RING, 100.6X95X2.8, NBR, BLACK |
| 490-0011-000 | Consumable | EXTERNAL FILTER, 37MM, 0.45UM PTFE |
Installation and service
Isolate power. Fit the lamp with PTFE O-ring 430-0014-001. Replace water traps and dust filters on the manual interval.
FAQ
- Substitute the PID lamp?
- No. DigiPID needs the specified MARK2 10.6 eV lamp and PTFE O-ring.
- Outputs?
- 3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.
- Do kits include the detector?
- Weather/pretreatment/dryer kits usually exclude the instrument.
- Tubing order?
- PE/PTFE tubing is sold per metre — see family spares.
- SKU type?
- Kind: consumable.
Documents
English datasheet · Combined Manual Rev H · TVOC gas table · product-9019 · product-8017
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N C01-0001-R00, gas/range and approval.