C01-3007-000 | RAEGuard 2 PID Spare
C01-3007-000 is a RAEGuard 2 PID consumable or spare: SENSOR DETECTOR ASSY, DIGI PID. It needs a detector kit.
English-list hub: product-9019. China-list hub: product-8017. Each part number has a single HTML file.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | RAEGuard 2 PID / FGM-200X | C01 |
| Type | Instrument / accessory / consumable / spare | Spare |
| English-list group | Instrument / Accessories / Consumables & Spares | Consumables and Spares |
| This SKU | SENSOR DETECTOR ASSY, DIGI PID | C01-3007-000 |
Technical specifications
| Category | Spare |
|---|---|
| Group | Consumables and Spares |
| Description | SENSOR DETECTOR ASSY, DIGI PID |
| Mates to | RAEGuard 2 PID / product-9019 |
| Note | Accessories and spares are not detectors. |
Why this part number
Order C01-3007-000 to match DigiPID / host parts. Do not substitute a non-MARK2 10.6 eV lamp.
What it mates with
C01-3007-000 belongs to Consumables and Spares. This SKU is an accessory, consumable or spare.
Typical applications
C01-3007-000 is used for calibration, lamp/filter service or module repair.
Selection contrast
| P/N | Type | Description |
|---|---|---|
| 081-0002-000 | Spare | Kit, Lamp Cleaning |
| 3006-6744-001 | Spare | HART Module for RAEGuard2 PID, UHM-01 |
| 411-0024-026 | Spare | TUBING, TYGON, 332X732X116 |
| 430-0009-025 | Spare | SCREW PKG 25, MACHINE, 256X316, (PCB MOUNT |
| 430-0014-001 | Spare | Teflon O-Ring(LAMP use) |
| 430-0314-000 | Spare | SCREW, M4X12, SET, SOCKET, HEX, SS, NC, GB80-85 |
| 430-B082-0H0 | Spare | O-Ring,40x35x2.5mm, Silicon Rubber |
Installation and service
Isolate power. Fit the lamp with PTFE O-ring 430-0014-001. Replace water traps and dust filters on the manual interval.
FAQ
- Enquiry?
- Quote full P/N C01-3007-000 plus sampling/range; lead time is lot-based.
- Which line is C01-3007-000?
- RAE / Honeywell RAEGuard 2 PID (FGM-2001/2002) fixed VOC.
- Vs RAEGuard 3?
- RG2 PID is VOC; RG3 covers CAT/NDIR/EC toxic-O₂.
- Substitute the PID lamp?
- No. DigiPID needs the specified MARK2 10.6 eV lamp and PTFE O-ring.
- Outputs?
- 3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.
Documents
English datasheet · Combined Manual Rev H · TVOC gas table · product-9019 · product-8017
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N C01-3007-000, gas/range and approval.