8490-0040-000 | RAEGuard 2 PID Spare
8490-0040-000 is a RAEGuard 2 PID TVOC Gas Detector Spare: Tag plate with chain. It does not measure VOC by itself.
.png)
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | RAEGuard 2 PID / FGM-200X | 8490 |
| Type | Instrument / kit / accessory / spare | Spare |
| Group | TVOC / weather / pretreatment / dryer | TVOC Gas Detector |
| This SKU | Tag plate with chain | 8490-0040-000 |
Technical specifications
| Category | Spare |
|---|---|
| Family | TVOC Gas Detector |
| Description | Tag plate with chain |
| Mates to | RAEGuard 2 PID FGM-200X / product-8017 |
| Note | Kits and spares are not detectors. |
Why this part number
Order 8490-0040-000 so mechanics and sample path match TVOC Gas Detector. Do not substitute an XCD cartridge or a non-10.6 eV lamp.
Spares and mates
8490-0040-000 belongs to TVOC Gas Detector. This SKU is a kit, accessory or spare and needs a RAEGuard 2 PID detector. Hub: product-8017.
Typical applications
8490-0040-000 ships with RAEGuard 2 PID for install, weather protection, calibration or service.
Selection contrast
| P/N | Type | Description |
|---|---|---|
| 3006-6713-001 | Spare | Sounder/beacon 3/4" NPT M, SP-07Plus, red lamp |
| 3006-6715-001 | Spare | Sounder/beacon 3/4" NPT M, SP-07Plus, blue lamp |
| 3006-6744-001 | Spare | HART module, UHM-01 |
| C01-0902-011 | Spare | Smart digital PID sensor module (with lamp), 0–100 ppm, Diffusion |
| C01-0902-012 | Spare | Smart digital PID sensor module (with lamp), 0–1000 ppm, Diffusion |
| C01-0001-000 | Spare | Smart digital PID sensor module (with lamp), 0–100 ppm, Flow Through |
| C01-0002-000 | Spare | Smart digital PID sensor module (with lamp), 0–1000 ppm, Flow Through |
Installation and service
Isolate power before fitting 8490-0040-000. Match lamp O-rings to the DigiPID module; tubing is per metre.
FAQ
- Hazardous-area service?
- DigiPID unplugs for off-line cal; follow site permits.
- Substitute another PID lamp?
- No. DigiPID uses MARK2 10.6 eV 1/2" lamp 050-0061-001 with the PTFE O-ring.
- Outputs?
- 3-wire 4–20 mA, RS-485 Modbus, three relays; optional HART module.
- Substitute the PID lamp?
- No. DigiPID needs the specified MARK2 10.6 eV lamp and PTFE O-ring.
- Vs RAEGuard 3?
- RG2 PID is VOC; RG3 covers CAT/NDIR/EC toxic-O₂.
Documents
English datasheet · Chinese specification · Chinese manual · Brochure PPT · Family matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N 8490-0040-000, gas/range and approval.