411-0018-037 | RAEGuard 2 PID Spare
411-0018-037 is a RAEGuard 2 PID Weather Protection Enclosure Spare: Polyethylene tubing / metre. It does not measure VOC by itself.
Same P/N also listed under TVOC Gas Detector, Pretreatment Device, Pre-filter Dryer.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | RAEGuard 2 PID / FGM-200X | 411 |
| Type | Instrument / kit / accessory / spare | Spare |
| Group | TVOC / weather / pretreatment / dryer | Weather Protection Enclosure |
| This SKU | Polyethylene tubing / metre | 411-0018-037 |
Technical specifications
| Category | Spare |
|---|---|
| Family | Weather Protection Enclosure |
| Description | Polyethylene tubing / metre |
| Mates to | RAEGuard 2 PID FGM-200X / product-8017 |
| Note | Kits and spares are not detectors. |
Why this part number
Order 411-0018-037 so mechanics and sample path match Weather Protection Enclosure. Do not substitute an XCD cartridge or a non-10.6 eV lamp.
Spares and mates
411-0018-037 belongs to Weather Protection Enclosure. This SKU is a kit, accessory or spare and needs a RAEGuard 2 PID detector. Hub: product-8017.
Typical applications
411-0018-037 ships with RAEGuard 2 PID for install, weather protection, calibration or service.
Selection contrast
| P/N | Type | Description |
|---|---|---|
| D03-2029-000 | Spare | Sunshade |
| 411-0005-000 | Spare | PTFE hard tubing / metre |
| D03-3018-005 | Spare | Water-trap filter assembly / pack of 5, Flow Through |
| D03-0305-000 | Kit | Weather Protection Enclosure KIT, RAEGuard 2 PID Flow Through |
| 500-2004-000 | Accessory | Air filter |
| D03-2030-000 | Accessory | Sealing ring cover |
| 430-B093-070 | Accessory | Sealing O-ring |
Installation and service
Isolate power before fitting 411-0018-037. Match lamp O-rings to the DigiPID module; tubing is per metre.
FAQ
- Which line is 411-0018-037?
- RAE / Honeywell RAEGuard 2 PID (FGM-2001/2002) fixed VOC.
- Lead time?
- Lot-based. Match the part number; do not substitute a look-alike D03/C01 SKU.
- Documents?
- Hub pages link CN/EN specs, manuals and FAQ packs.
- Substitute the PID lamp?
- No. DigiPID needs the specified MARK2 10.6 eV lamp and PTFE O-ring.
- Enquiry?
- Quote full P/N 411-0018-037 plus sampling/range; lead time is lot-based.
Documents
English datasheet · Chinese specification · Chinese manual · Brochure PPT · Family matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N 411-0018-037, gas/range and approval.