SENKO SI-H100 extractive wall mount, sample up to 30 m, smart cartridge, Ethernet PoE, optional pyrolyzer (e.g. NF₃).

| Item | Specification |
|---|---|
| Target gas & range | By head; extractive sampling |
| Type | SI-H100 extractive fixed |
| Output & alarms | 4–20 mA, optional relays / RS-485 |
| Protection & Ex | IP65/66; Ex d or IS as ordered on the plate |
| Operating temperature | Typically −20 to +55 °C |
| Certificates / acceptance | SENKO Korea. IECEx/ATEX on the nameplate. A GB scan is not equivalent. |
From SENKO published data. Nameplate and current list win.
Pump ~2 years. 3 relays, 4–20 mA, Modbus/TCP, web firmware. ppb-capable.
| Item | Specification |
|---|---|
| Target gas & range | By head; extractive sampling |
| Type | SI-H100 extractive fixed |
| Output & alarms | 4–20 mA, optional relays / RS-485 |
| Protection & Ex | IP65/66; Ex d or IS as ordered on the plate |
| Operating temperature | Typically −20 to +55 °C |
| Certificates / acceptance | SENKO Korea. IECEx/ATEX on the nameplate. A GB scan is not equivalent. |
From SENKO published data. Nameplate and current list win.
Fabs, WWTPs and pipe galleries where the point is remote or needs pyrolysis: extractive sampling up to ~30 m with Modbus/TCP and relay outputs.
| Model | Target gas | When to pick it |
|---|---|---|
| SI-301 | O₂/toxic/LEL by cartridge | Ex d extractive for fabs / WWTP |
| SI-310 | C₄F₆ / C₅F₈ / CH₂F₂ / CH₃F via pyrolysis | Built-in pyrolyzer for fab specialty gases |