Honeywell XNX XNX-AMAV-MNIF1 – MPD IR propane 0–100 %LEL, mV, ATEX, Aluminium, M25

XNX-AMAV-MNIF1 is a factory-configured Honeywell XNX with MPD infrared propane 0–100 %LEL, mV personality, ATEX / IECEx (INMETRO on selected MPD SKUs), 4 × M25, LM25 aluminium (painted), Modbus RTU + 4–20 mA HART, no local HART port. Order it for LPG bullets and cylinder halls; methane IR (IV1) will under-read propane.

Same sensor, swap enclosure/approval: aluminium XNX-AMAV-MNIF1, 316SS XNX-AMSV-MNIF1, other approval XNX-UTAV-MNIF1. XNX-AMAV-MNIF1 · XNX-AMSV-MNIF1 · XNX-UTAV-MNIF1

Request quote for this P/N XNX family matrix Open XNX product page
XNX-AMAV-MNIF1 Honeywell XNX propane Aluminium M25

Part-number decode

SegmentMeaningThis SKU
XNXHoneywell XNX universal transmitterXNX
A / UApproval A=ATEX/IECEx; U=UL/cULA
M / TEntry M=M25; T=3/4" NPTM
A / SEnclosure A=aluminium; S=316SSA
V / I / EPersonality V=mV(MPD); I=IR Optima/Excel; E=ECV
N / R / M / FOption N=HART only; R=relays; M=Modbus; F=FFBM
N / HLocal HART port N=no; H=yesN
IF1MPD IR propane 0–100 %LELIF1

Same sensor, swap enclosure/approval: aluminium XNX-AMAV-MNIF1, 316SS XNX-AMSV-MNIF1, other approval XNX-UTAV-MNIF1.

Technical specifications

CategoryTransmitter Configured
PersonalitymV personality (MPD catalytic / MPD IR)
Sensor / rangeMPD IR propane 0–100 %LEL
TargetC₃H₈ / propane
PrincipleMPD infrared (propane)
OutputModbus RTU + 4–20 mA HART
Local HARTno local HART port
Supply16–32 VDC (24 VDC nominal)
EnclosureLM25 aluminium (painted)
Entries4 × M25
DisplayBacklit LCD, magnetic-wand menus
IngressIP66
ApprovalsATEX / IECEx (INMETRO on selected MPD SKUs)
Temperature−40~+65 ℃
Massapprox. 2.8 kg
Mates withHoneywell MPD catalytic bead or MPD infrared sensors

Why this personality / sensor

Propane is heavier than air and slides into pits. MPD IR tuned for C₃ does not need oxygen and ignores silicone poisons that kill CB1 beads. Mount 200–400 mm above grade at the pit lip, not on the roof.

Personality and replaceable parts

XNX-AMAV-MNIF1 uses the mV personality (MPD catalytic / MPD IR) board and mates with Honeywell MPD catalytic bead or MPD infrared sensors. Factory-fitted with MPD IR propane 0–100 %LEL. Spares live on product-3991. Do not substitute Sensepoint XCD cartridges on XNX.

Typical applications

LPG tank farms, bottle-filling halls and kitchen-gas manifolds need a propane-specific IR trip. XNX hard-wires 4–20 mA HART to tank ESD; a handheld only proves the aisle you walked.

Selection contrast

P/NGasRangeOptionBody
XNX-AMSV-MNIF1C₃H₈0–100 %LELModbus316SS
XNX-UTAV-MNIF1C₃H₈0–100 %LELModbusAluminium
XNX-AMAV-MNCB1LEL0–100 %LELModbusAluminium
XNX-AMAV-MNIV1CH₄0–100 %LELModbusAluminium
XNX-AMAV-MNIC1CO₂0–5 %v/vModbusAluminium
XNX-AMAV-MNNNNbody—ModbusAluminium
XNX-AMAV-NNIF1C₃H₈0–100 %LELHARTAluminium

XNX family matrix

Installation and wiring

Wall-mount XNX-AMAV-MNIF1 (LM25 aluminium (painted), approx. 2.8 kg) on a rigid stand sized for that mass. This SKU uses 4 × M25 entries—glands must match; do not retap XNX-AMAV-MNIF1. Land XNX-AMAV-MNIF1 4–20 mA HART per the loop drawing; relays/Modbus/FFB exist only on the matching option board. Magnetic-wand menus on the XNX-AMAV-MNIF1 lid stay non-intrusive. XNX-AMAV-MNIF1 propane belongs at the pit lip, not the roof.

FAQ

Which sensors?
CAT/IR/EC etc. via personality/sensor configuration digits.
When should I swap XNX-AMAV-MNIF1 aluminium for 316SS?
Use XNX-AMAV-MNIF1 (aluminium, ~2.8 kg) in inland, painted plant. Coastal, splash and sour-water decks should move to stainless sibling XNX-AMSV-MNIF1.
Enquiry?
Quote full P/N XNX-AMAV-MNIF1 plus sensor/enclosure/approval.
Documents?
Manual links on SKU/hub pages.
Calibration?
Per fitted sensor and target gas.

Documents

Honeywell XNX datasheet / manual · On-site XNX selection matrix

Availability and enquiry

Availability: Not in stock — orders accepted; lead time approx. 16 weeks. Quote full P/N XNX-AMAV-MNIF1, gas/range and approval.

Request quote for this P/N
WhatsAppTop