Does SPXCDALMNXM have relays?

SPXCDALMNXM has three relays 5 A @ 250 VAC. Relays are not the EN performance safety function.

Is SPXCDALMNXM ATEX or UL certified?

SPXCDALMNXM is the ATEX / IECEx / GB scheme. Do not use it as the other system.

How is SPXCDALMNXM mounted?

Wall-mount SPXCDALMNXM on the one-piece plate with M8 bolts; pipe Ø40–80 mm uses SPXCDMTBR, duct SPXCDDMK. Glands must match 2 × M20.

Which cartridge or transmitter pairs with SPXCDALMNXM?

Same gas code. Cartridge SPXCDXSNXSS; transmitter needs the same family.

How much does SPXCDALMNXM weigh?

SPXCDALMNXM approx. 1.7 kg (trust the nameplate).

SPXCDALMNXM

Name: SPXCDALMNXM | Honeywell Sensepoint XCD nitrogen dioxide 10-50ppm | GZion Instruments
Brand: Honeywell
SKU: SPXCDALMNXM
Availability: BackOrder

SPXCDALMNXM is the Sensepoint XCD Electrochemical (Surecell™) nitrogen dioxide complete transmitter, default 10-50ppm, LM25 epoxy-coated aluminium, 2 × M20, ATEX / IECEx / GB. RS485 Modbus RTU.

Request quote All P/N index XCD STD hub

Part-number matrix

Segment	Meaning	This SKU
SPXCD	Sensepoint XCD series	SPXCD
A / U	Approval A=ATEX/IECEx/GB; U=UL	A
L / S	Enclosure L=LM25 aluminium; S=316SS	L
M / N	Entry M=M20; N=3/4″ NPT	M
NX	nitrogen dioxide，Electrochemical (Surecell™)	NX
M	RS485 Modbus RTU	M

Key specifications

Target gas	NO₂ / nitrogen dioxide
Principle	Electrochemical (Surecell™)
Default range	10-50ppm
User FSD window	10.0–50.0ppm
Resolution	5ppm
Output	4–20 mA sink/source + Modbus RTU
Supply	16–32 VDC (24 VDC nominal)
Power	3.7 W
Enclosure	LM25 epoxy-coated aluminium
Entries	2 × M20
Display	Tri-colour backlight LCD
Relays	3×5A@250VAC
Ingress	IP66
Approvals	ATEX / IECEx / GB
Temperature	−40~+65 ℃
Mass	approx. 1.7 kg

Why this principle

Fixed-point leak monitoring into a controller/ESD on 4–20 mA.

Typical applications

Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.

Installation

Wall-mount SPXCDALMNXM through the one-piece plate with M8 bolts. Entries 2 × M20 — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.

FAQ

Does SPXCDALMNXM have relays?: SPXCDALMNXM has three relays 5 A @ 250 VAC. Relays are not the EN performance safety function.
Is SPXCDALMNXM ATEX or UL certified?: SPXCDALMNXM is the ATEX / IECEx / GB scheme. Do not use it as the other system.
How is SPXCDALMNXM mounted?: Wall-mount SPXCDALMNXM on the one-piece plate with M8 bolts; pipe Ø40–80 mm uses SPXCDMTBR, duct SPXCDDMK. Glands must match 2 × M20.
Which cartridge or transmitter pairs with SPXCDALMNXM?: Same gas code. Cartridge SPXCDXSNXSS; transmitter needs the same family.
How much does SPXCDALMNXM weigh?: SPXCDALMNXM approx. 1.7 kg (trust the nameplate).

Downloads

Honeywell official technical manual and certificates are available from GZion as PDF.

Availability and enquiry

Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDALMNXM.

Request quote