SPXCDALMO1
SPXCDALMO1 is the Sensepoint XCD Electrochemical (Surecell™) oxygen complete transmitter, default 0-25.0%Vol, LM25 epoxy-coated aluminium, 2 × M20, ATEX / IECEx / GB.
Part-number matrix
| Segment | Meaning | This SKU |
|---|---|---|
| SPXCD | Sensepoint XCD series | SPXCD |
| A / U | Approval A=ATEX/IECEx/GB; U=UL | A |
| L / S | Enclosure L=LM25 aluminium; S=316SS | L |
| M / N | Entry M=M20; N=3/4″ NPT | M |
| O1 | oxygen，Electrochemical (Surecell™) | O1 |
Key specifications
| Target gas | O₂ / oxygen |
|---|---|
| Principle | Electrochemical (Surecell™) |
| Default range | 0-25.0%Vol |
| User FSD window | 25.0%Vol only |
| Resolution | 0.1%Vol |
| Output | 4–20 mA sink/source + optional Modbus RTU |
| Supply | 16–32 VDC (24 VDC nominal) |
| Power | 3.7 W |
| Enclosure | LM25 epoxy-coated aluminium |
| Entries | 2 × M20 |
| Display | Tri-colour backlight LCD |
| Relays | 3×5A@250VAC |
| Ingress | IP66 |
| Approvals | ATEX / IECEx / GB |
| Temperature | −40~+65 ℃ |
| Mass | approx. 1.7 kg |
Why this principle
Fixed-point leak monitoring into a controller/ESD on 4–20 mA.
Typical applications
Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.
Installation
Wall-mount SPXCDALMO1 through the one-piece plate with M8 bolts. Entries 2 × M20 — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.
FAQ
- Does SPXCDALMO1 provide 4–20 mA?
- SPXCDALMO1 outputs 4–20 mA (source/sink). 4–20 mA is the only EN performance safety function.
- What is the power draw of SPXCDALMO1?
- SPXCDALMO1 typically draws 3.7 W.
- How is SPXCDALMO1 mounted?
- Wall-mount SPXCDALMO1 on the one-piece plate with M8 bolts; pipe Ø40–80 mm uses SPXCDMTBR, duct SPXCDDMK. Glands must match 2 × M20.
- Which accessories go with SPXCDALMO1?
- With SPXCDALMO1 people order S3KCAL, magnet SPXCDMAG, weather cap SPXCDWP, pipe kit SPXCDMTBR, duct SPXCDDMK.
- Is SPXCDALMO1 ATEX or UL certified?
- SPXCDALMO1 is the ATEX / IECEx / GB scheme. Do not use it as the other system.
- What gas and range does SPXCDALMO1 cover?
- SPXCDALMO1 measures oxygen at default 0-25.0%Vol (user window 25.0%Vol only). Principle: Electrochemical (Surecell™).
- Who supplies SPXCDALMO1 and what should I quote?
- Supplied by authorized Honeywell distributor Beijing Dongfang Haitai (GZion). Quote full P/N SPXCDALMO1. In stock. Quote full P/N SPXCDALMO1.
- Does SPXCDALMO1 need weather protection?
- Outdoors, fit SPXCDWP weather protection on SPXCDALMO1 with the sinter down.
- What is the lead time for SPXCDALMO1?
- In stock. Quote full P/N SPXCDALMO1.
Downloads
Honeywell official technical manual and certificates are available from GZion as PDF.
Availability and enquiry
Availability:In stock. Quote full P/N SPXCDALMO1.