SPXCDASMNX
SPXCDASMNX is the Sensepoint XCD Electrochemical (Surecell™) nitrogen dioxide complete transmitter, default 10-50ppm, 316 stainless steel, 2 × M20, ATEX / IECEx / GB.
Part-number matrix
| Segment | Meaning | This SKU |
|---|---|---|
| SPXCD | Sensepoint XCD series | SPXCD |
| A / U | Approval A=ATEX/IECEx/GB; U=UL | A |
| L / S | Enclosure L=LM25 aluminium; S=316SS | S |
| M / N | Entry M=M20; N=3/4″ NPT | M |
| NX | nitrogen dioxide，Electrochemical (Surecell™) | NX |
Key specifications
| Target gas | NO₂ / nitrogen dioxide |
|---|---|
| Principle | Electrochemical (Surecell™) |
| Default range | 10-50ppm |
| User FSD window | 10.0–50.0ppm |
| Resolution | 5ppm |
| Output | 4–20 mA sink/source + optional Modbus RTU |
| Supply | 16–32 VDC (24 VDC nominal) |
| Power | 3.7 W |
| Enclosure | 316 stainless steel |
| Entries | 2 × M20 |
| Display | Tri-colour backlight LCD |
| Relays | 3×5A@250VAC |
| Ingress | IP66 |
| Approvals | ATEX / IECEx / GB |
| Temperature | −40~+65 ℃ |
| Mass | approx. 3.7 kg |
Why this principle
Fixed-point leak monitoring into a controller/ESD on 4–20 mA.
Typical applications
Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.
Installation
Wall-mount SPXCDASMNX through the one-piece plate with M8 bolts. Entries 2 × M20 — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.
FAQ
- Does SPXCDASMNX provide 4–20 mA?
- SPXCDASMNX outputs 4–20 mA (source/sink). 4–20 mA is the only EN performance safety function.
- What temperature rating does SPXCDASMNX have?
- SPXCDASMNX certified −40 to +65 °C (T6); some T-class to +75 °C.
- What supply voltage does SPXCDASMNX need?
- SPXCDASMNX supply is 16–32 VDC (24 VDC nominal). A cartridge is not separately powered.
- Does SPXCDASMNX have relays?
- SPXCDASMNX has three relays 5 A @ 250 VAC. Relays are not the EN performance safety function.
- Does SPXCDASMNX have a display?
- SPXCDASMNX transmitter has a tri-colour backlight LCD. The cartridge itself has no display.
- Can I magnetically calibrate SPXCDASMNX without opening the lid?
- Use the S3KCAL wand on the SPXCDASMNX lid calibration pad — non-intrusive. Recalibrate after a swap.
Downloads
Honeywell official technical manual and certificates are available from GZion as PDF.
Availability and enquiry
Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDASMNX.