SPXCDASMPXM
SPXCDASMPXM is the Sensepoint XCD Infrared (dual-beam) propane complete transmitter, default 0-100%LEL, 316 stainless steel, 2 × M20, ATEX / IECEx / GB. RS485 Modbus RTU.
Part-number matrix
| Segment | Meaning | This SKU |
|---|---|---|
| SPXCD | Sensepoint XCD series | SPXCD |
| A / U | Approval A=ATEX/IECEx/GB; U=UL | A |
| L / S | Enclosure L=LM25 aluminium; S=316SS | S |
| M / N | Entry M=M20; N=3/4″ NPT | M |
| PX | propane，Infrared (dual-beam) | PX |
| M | RS485 Modbus RTU | M |
Key specifications
| Target gas | C₃H₈ / propane |
|---|---|
| Principle | Infrared (dual-beam) |
| Default range | 0-100%LEL |
| User FSD window | 20.0–100.0%LEL |
| Resolution | 10%LEL |
| Output | 4–20 mA sink/source + Modbus RTU |
| Supply | 16–32 VDC (24 VDC nominal) |
| Power | 3.7 W |
| Enclosure | 316 stainless steel |
| Entries | 2 × M20 |
| Display | Tri-colour backlight LCD |
| Relays | 3×5A@250VAC |
| Ingress | IP66 |
| Approvals | ATEX / IECEx / GB |
| Temperature | −40~+65 ℃ |
| Mass | approx. 3.7 kg |
Why this principle
Fixed-point leak monitoring into a controller/ESD on 4–20 mA.
Typical applications
Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.
Installation
Wall-mount SPXCDASMPXM through the one-piece plate with M8 bolts. Entries 2 × M20 — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.
FAQ
- Who supplies SPXCDASMPXM and what should I quote?
- Supplied by authorized Honeywell distributor Beijing Dongfang Haitai (GZion). Quote full P/N SPXCDASMPXM. Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDASMPXM.
- Can I retap SPXCDASMPXM from M20 to NPT?
- No. SPXCDASMPXM flameproof entries are machined 2 × M20. Order the matching P/N for the other thread.
- Is SPXCDASMPXM aluminium or stainless?
- SPXCDASMPXM enclosure is 316 stainless steel. Aluminium is lighter; 316SS for salt/CIP. Sibling SPXCDALMPXM.
- Can I fit a different-gas cartridge on SPXCDASMPXM?
- XCD auto-recognises the same family only. Do not mix an O₂ cell onto a flammable/toxic SPXCDASMPXM transmitter.
- Which cartridge or transmitter pairs with SPXCDASMPXM?
- Same gas code. Cartridge SPXCDXSPXSS; transmitter needs the same family.
- Is the safety function on SPXCDASMPXM the relays or 4–20 mA?
- On SPXCDASMPXM the only EN performance safety function is 4–20 mA. Relays and Modbus are not SIL/performance-certified.
Downloads
Honeywell official technical manual and certificates are available from GZion as PDF.
Availability and enquiry
Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDASMPXM.