How is SPXCDASMTXFM mounted?

Wall-mount SPXCDASMTXFM on the one-piece plate with M8 bolts; pipe Ø40–80 mm uses SPXCDMTBR, duct SPXCDDMK. Glands must match 2 × M20.

Does SPXCDASMTXFM have a display?

SPXCDASMTXFM transmitter has a tri-colour backlight LCD. The cartridge itself has no display.

Does SPXCDASMTXFM need weather protection?

Outdoors, fit SPXCDWP weather protection on SPXCDASMTXFM with the sinter down.

How do I calibrate SPXCDASMTXFM?

Zero/span SPXCDASMTXFM on the transmitter with certified gas and cap S3KCAL. Recalibrate after cartridge swap.

SPXCDASMTXFM

Name: SPXCDASMTXFM | Honeywell Sensepoint XCD flammable transmitter (no cartridge) — | GZion Instruments
Brand: Honeywell
SKU: SPXCDASMTXFM
Availability: BackOrder

SPXCDASMTXFM is the Sensepoint XCD flammable transmitter (no cartridge) — no sensor cartridge included. 316 stainless steel, 2 × M20, ATEX / IECEx / GB. Order a same-family SPXCDXS*SS separately. RS485 Modbus RTU.

Request quote All P/N index XCD STD hub

Part-number matrix

Segment	Meaning	This SKU
SPXCD	Sensepoint XCD series	SPXCD
A / U	Approval A=ATEX/IECEx/GB; U=UL	A
L / S	Enclosure L=LM25 aluminium; S=316SS	S
M / N	Entry M=M20; N=3/4″ NPT	M
TXF	flammable transmitter (no cartridge)，Transmitter only (no cartridge)	TXF
M	RS485 Modbus RTU	M

Key specifications

Type	Transmitter
Family	flammable transmitter (no cartridge)
Not included	Sensor cartridge (order SPXCDXS*SS)
Output	4–20 mA sink/source + Modbus RTU
Supply	16–32 VDC (24 VDC nominal)
Power	4.9 W
Enclosure	316 stainless steel
Entries	2 × M20
Display	Tri-colour backlight LCD
Relays	3×5A@250VAC
Ingress	IP66
Approvals	ATEX / IECEx / GB
Temperature	−40~+65 ℃
Mass	approx. 3.7 kg

Why this principle

Fixed-point leak monitoring into a controller/ESD on 4–20 mA.

Typical applications

Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.

Installation

Wall-mount SPXCDASMTXFM through the one-piece plate with M8 bolts. Entries 2 × M20 — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.

FAQ

What is the lead time for SPXCDASMTXFM?: Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDASMTXFM.
How is SPXCDASMTXFM mounted?: Wall-mount SPXCDASMTXFM on the one-piece plate with M8 bolts; pipe Ø40–80 mm uses SPXCDMTBR, duct SPXCDDMK. Glands must match 2 × M20.
Does SPXCDASMTXFM have a display?: SPXCDASMTXFM transmitter has a tri-colour backlight LCD. The cartridge itself has no display.
Does SPXCDASMTXFM need weather protection?: Outdoors, fit SPXCDWP weather protection on SPXCDASMTXFM with the sinter down.
How do I calibrate SPXCDASMTXFM?: Zero/span SPXCDASMTXFM on the transmitter with certified gas and cap S3KCAL. Recalibrate after cartridge swap.

Downloads

Honeywell official technical manual and certificates are available from GZion as PDF.

Availability and enquiry

Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDASMTXFM.

Request quote