SPXCDULNB2M
SPXCDULNB2M is the Sensepoint XCD Infrared (dual-beam) carbon dioxide 5%vol complete transmitter, default 0-5.00%Vol, LM25 epoxy-coated aluminium (UL), 2 × ¾″ NPT, UL. RS485 Modbus RTU.
Part-number matrix
| Segment | Meaning | This SKU |
|---|---|---|
| SPXCD | Sensepoint XCD series | SPXCD |
| A / U | Approval A=ATEX/IECEx/GB; U=UL | U |
| L / S | Enclosure L=LM25 aluminium; S=316SS | L |
| M / N | Entry M=M20; N=3/4″ NPT | N |
| B2 | carbon dioxide 5%vol，Infrared (dual-beam) | B2 |
| M | RS485 Modbus RTU | M |
Key specifications
| Target gas | CO₂ / carbon dioxide 5%vol |
|---|---|
| Principle | Infrared (dual-beam) |
| Default range | 0-5.00%Vol |
| User FSD window | 0-5%VOL only |
| Resolution | n/a |
| Output | 4–20 mA sink/source + Modbus RTU |
| Supply | 12–32 VDC (24 VDC nominal) |
| Power | 3.7 W |
| Enclosure | LM25 epoxy-coated aluminium (UL) |
| Entries | 2 × ¾″ NPT |
| Display | Tri-colour backlight LCD |
| Relays | 3×5A@250VAC |
| Ingress | IP66 |
| Approvals | UL |
| Temperature | −40~+65 ℃ |
| Mass | approx. 1.7 kg |
Why this principle
Fixed-point leak monitoring into a controller/ESD on 4–20 mA.
Typical applications
Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.
Installation
Wall-mount SPXCDULNB2M through the one-piece plate with M8 bolts. Entries 2 × ¾″ NPT — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.
FAQ
- Does SPXCDULNB2M need weather protection?
- Outdoors, fit SPXCDWP weather protection on SPXCDULNB2M with the sinter down.
- What is the lead time for SPXCDULNB2M?
- Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDULNB2M.
- What sensor life should I plan for SPXCDULNB2M?
- Plan SPXCDULNB2M sensor life by principle: IR ~5 years. Replace the cartridge and recalibrate.
- What temperature rating does SPXCDULNB2M have?
- SPXCDULNB2M certified −40 to +65 °C (T6); some T-class to +75 °C.
- Is the safety function on SPXCDULNB2M the relays or 4–20 mA?
- On SPXCDULNB2M the only EN performance safety function is 4–20 mA. Relays and Modbus are not SIL/performance-certified.
- Who supplies SPXCDULNB2M and what should I quote?
- Supplied by authorized Honeywell distributor Beijing Dongfang Haitai (GZion). Quote full P/N SPXCDULNB2M. Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDULNB2M.
- Does SPXCDULNB2M provide 4–20 mA?
- SPXCDULNB2M outputs 4–20 mA (source/sink). 4–20 mA is the only EN performance safety function.
Downloads
Honeywell official technical manual and certificates are available from GZion as PDF.
Availability and enquiry
Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDULNB2M.