SPXCDUSNO1
SPXCDUSNO1 is the Sensepoint XCD Electrochemical (Surecell™) oxygen complete transmitter, default 0-25.0%Vol, 316 stainless steel (UL), 2 × ¾″ NPT, UL.
Part-number matrix
| Segment | Meaning | This SKU |
|---|---|---|
| SPXCD | Sensepoint XCD series | SPXCD |
| A / U | Approval A=ATEX/IECEx/GB; U=UL | U |
| L / S | Enclosure L=LM25 aluminium; S=316SS | S |
| M / N | Entry M=M20; N=3/4″ NPT | N |
| O1 | oxygen，Electrochemical (Surecell™) | O1 |
Key specifications
| Target gas | O₂ / oxygen |
|---|---|
| Principle | Electrochemical (Surecell™) |
| Default range | 0-25.0%Vol |
| User FSD window | 25.0%Vol only |
| Resolution | 0.1%Vol |
| Output | 4–20 mA sink/source + optional Modbus RTU |
| Supply | 12–32 VDC (24 VDC nominal) |
| Power | 3.7 W |
| Enclosure | 316 stainless steel (UL) |
| Entries | 2 × ¾″ NPT |
| Display | Tri-colour backlight LCD |
| Relays | 3×5A@250VAC |
| Ingress | IP66 |
| Approvals | UL |
| Temperature | −40~+65 ℃ |
| Mass | approx. 3.7 kg |
Why this principle
Fixed-point leak monitoring into a controller/ESD on 4–20 mA.
Typical applications
Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.
Installation
Wall-mount SPXCDUSNO1 through the one-piece plate with M8 bolts. Entries 2 × ¾″ NPT — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.
FAQ
- Who supplies SPXCDUSNO1 and what should I quote?
- Supplied by authorized Honeywell distributor Beijing Dongfang Haitai (GZion). Quote full P/N SPXCDUSNO1. Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDUSNO1.
- Does SPXCDUSNO1 have a display?
- SPXCDUSNO1 transmitter has a tri-colour backlight LCD. The cartridge itself has no display.
- Is SPXCDUSNO1 IP66?
- SPXCDUSNO1 housing is IP66 (EN 60529). With weather cap and sinter down, IPX6 is kept.
- Can I hot-swap SPXCDUSNO1 live?
- Do not hot-swap live. De-energise first; live swap damages pins and the flameproof joint.
- Can I magnetically calibrate SPXCDUSNO1 without opening the lid?
- Use the S3KCAL wand on the SPXCDUSNO1 lid calibration pad — non-intrusive. Recalibrate after a swap.
- Is SPXCDUSNO1 a complete kit, transmitter-only, or cartridge?
- SPXCDUSNO1 is complete kit (transmitter + cartridge).
- Is SPXCDUSNO1 aluminium or stainless?
- SPXCDUSNO1 enclosure is 316 stainless steel (UL). Aluminium is lighter; 316SS for salt/CIP. Sibling SPXCDULNO1.
- Can I retap SPXCDUSNO1 from M20 to NPT?
- No. SPXCDUSNO1 flameproof entries are machined 2 × ¾″ NPT. Order the matching P/N for the other thread.
Downloads
Honeywell official technical manual and certificates are available from GZion as PDF.
Availability and enquiry
Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDUSNO1.