SPXCDUSNTXF
SPXCDUSNTXF is the Sensepoint XCD flammable transmitter (no cartridge) — no sensor cartridge included. 316 stainless steel (UL), 2 × ¾″ NPT, UL. Order a same-family SPXCDXS*SS separately.
Part-number matrix
| Segment | Meaning | This SKU |
|---|---|---|
| SPXCD | Sensepoint XCD series | SPXCD |
| A / U | Approval A=ATEX/IECEx/GB; U=UL | U |
| L / S | Enclosure L=LM25 aluminium; S=316SS | S |
| M / N | Entry M=M20; N=3/4″ NPT | N |
| TXF | flammable transmitter (no cartridge)，Transmitter only (no cartridge) | TXF |
Key specifications
| Type | Transmitter |
|---|---|
| Family | flammable transmitter (no cartridge) |
| Not included | Sensor cartridge (order SPXCDXS*SS) |
| Output | 4–20 mA sink/source + optional Modbus RTU |
| Supply | 12–32 VDC (24 VDC nominal) |
| Power | 4.9 W |
| Enclosure | 316 stainless steel (UL) |
| Entries | 2 × ¾″ NPT |
| Display | Tri-colour backlight LCD |
| Relays | 3×5A@250VAC |
| Ingress | IP66 |
| Approvals | UL |
| Temperature | −40~+65 ℃ |
| Mass | approx. 3.7 kg |
Why this principle
Fixed-point leak monitoring into a controller/ESD on 4–20 mA.
Typical applications
Fixed-point leak monitoring into a controller/ESD on 4–20 mA. Magnetic bump test without a hot-work permit.
Installation
Wall-mount SPXCDUSNTXF through the one-piece plate with M8 bolts. Entries 2 × ¾″ NPT — glands must match. Land 4–20 mA as three-wire. Magnetic wand calibration stays non-intrusive.
FAQ
- Does SPXCDUSNTXF have a display?
- SPXCDUSNTXF transmitter has a tri-colour backlight LCD. The cartridge itself has no display.
- Which accessories go with SPXCDUSNTXF?
- With SPXCDUSNTXF people order S3KCAL, magnet SPXCDMAG, weather cap SPXCDWP, pipe kit SPXCDMTBR, duct SPXCDDMK.
- Can I retap SPXCDUSNTXF from M20 to NPT?
- No. SPXCDUSNTXF flameproof entries are machined 2 × ¾″ NPT. Order the matching P/N for the other thread.
- How is SPXCDUSNTXF mounted?
- Wall-mount SPXCDUSNTXF on the one-piece plate with M8 bolts; pipe Ø40–80 mm uses SPXCDMTBR, duct SPXCDDMK. Glands must match 2 × ¾″ NPT.
- Does SPXCDUSNTXF need weather protection?
- Outdoors, fit SPXCDWP weather protection on SPXCDUSNTXF with the sinter down.
- Can I magnetically calibrate SPXCDUSNTXF without opening the lid?
- Use the S3KCAL wand on the SPXCDUSNTXF lid calibration pad — non-intrusive. Recalibrate after a swap.
- Is SPXCDUSNTXF IP66?
- SPXCDUSNTXF housing is IP66 (EN 60529). With weather cap and sinter down, IPX6 is kept.
- Can I fit a different-gas cartridge on SPXCDUSNTXF?
- XCD auto-recognises the same family only. Do not mix an O₂ cell onto a flammable/toxic SPXCDUSNTXF transmitter.
- What is the power draw of SPXCDUSNTXF?
- SPXCDUSNTXF typically draws 4.9 W.
Downloads
Honeywell official technical manual and certificates are available from GZion as PDF.
Availability and enquiry
Availability:Not in stock — orders accepted; lead time approx. 10 weeks. Quote full P/N SPXCDUSNTXF.