Honeywell Searchpoint Optima Plus 2108N5000H – Sampling, Hydrocarbon, ATEX / IECEx, HART+4–20 mA
2108N5000H is a Honeywell Searchpoint Optima Plus sampling point IR (Hydrocarbon), ATEX / IECEx, M25, 316SS, HART+4–20 mA, black-anodised flow housing without RGC. Order it when the sample is extracted to the head instead of diffusing through a weather cap.
Siblings: HART 2108N5000N, gas 2108N5001H, style 2108N4000H, approval 2108N5100H.
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| Family | Honeywell Searchpoint Optima Plus point IR | Optima Plus |
| 2108N | Current detector prefix (legacy is 2108B) | 2108N |
| 4 / 5 | 4=Standard diffusion; 5=Sampling | 5 |
| Approval | 0=ATEX M25; 1=UL NPT; 2=FM NPT; 4=MED; 6=CCCF | 0 |
| RGC | 0=no remote gassing cell; 1=RGC fitted | 0 |
| Gas | 0=Hydrocarbon; 1=Ethylene | 0 |
| Output | N=4–20 mA; H=HART+4–20 mA | H |
Technical specifications
| Category | Transmitter / Sampling |
|---|---|
| Description | Optima Plus Point IR Gas Detector,Hydrocarbon,HART+4-20mA,ATEX/IECEx,M25,316SS,sampling version with black anodised flow housing |
| Gas | Hydrocarbon |
| Output | HART+4–20 mA |
| Approvals | ATEX / IECEx |
| Entries | M25 |
| Enclosure | 316 不锈钢 |
| RGC | no |
| Principle | Point IR (dual source, dual beam) |
| Range | 0–100 %LEL (gas curve) |
| Ingress | IP66/IP67（探测器） |
Why this part number
Sampling SKU 2108N5000H uses a flow housing, not the dust-barrier + weather housing + deluge shade pack. Pressurised pump rooms and cold-box bypasses take this number; open-deck diffusion points take the Standard sibling.
Spares and mates
2108N5000H is Searchpoint Optima Plus Sampling. The detector is 316SS point IR with the factory window or flow-housing kit. Matrix: product-2698. Do not substitute Sensepoint XCD cartridges or XNX personalities.
Typical applications
Park 2108N5000H on LNG boil-off sample taps, solvent-coater ovens and compressor seal-gas extracts. 4–20 mA goes to the fire-and-gas panel; HART is asset management.
Selection contrast
| P/N | Type | Gas | Cert | Output |
|---|---|---|---|---|
| 2108N5000N | Sampling | Hydrocarbon | ATEX | 4–20 mA |
| 2108N5001H | Sampling | Ethylene | ATEX | HART+4–20 mA |
| 2108N5010H | Sampling | Hydrocarbon | ATEX | HART+4–20 mA |
| 2108N4000H | Standard | Hydrocarbon | ATEX | HART+4–20 mA |
| 2108N5100H | Sampling | Hydrocarbon | UL | HART+4–20 mA |
| 2108N4000N | Standard | Hydrocarbon | ATEX | 4–20 mA |
| 2108N4010N | Standard | Hydrocarbon | ATEX | 4–20 mA |
Installation and service
Mount 2108N5000H on a rigid 316 stand sized for the nameplate mass. Entries are M25 — do not retap. Land 4–20 mA on the fire-and-gas matrix; HART does not replace the trip pair. Pipe the flow housing into the sample line. Gas with the Hydrocarbon curve only.
FAQ
- Typical output?
- Often 4–20 mA — confirm by ordered configuration.
- Can I recertify 2108N5000H from hydrocarbon to ethylene in the field?
- No. This SKU is the Hydrocarbon curve. Order sibling 2108N5001H instead of swapping filters.
- Relation to XCD?
- Same vendor family of fixed detectors, different platforms/P/Ns.
- Can I retap the entries?
- No. 2108N5000H is ATEX / IECEx / M25. Other approvals are sibling 2108N5100H.
- Lead time?
- Lot-based.
Documents
Optima Plus datasheet 1 · Datasheet 2 · On-site part-number matrix
Availability and enquiry
Availability: Not in stock — orders accepted; lead time approx. 12 weeks. Quote full P/N 2108N5000H, gas/range and approval.