This page focuses on background & requirements for coal-to-oil applications with actionable Honeywell product guidance.
| Gas | Main source | Hazard | Suggested range |
|---|---|---|---|
| Carbon monoxide CO | Gasifier, shift, purification | Toxicity; sharp swings during gasifier start/stop | 0–500 / 0–2000 ppm |
| Hydrogen H₂ | Shift outlet, hydroliquefaction, H₂ compressors | Explosion (LEL 4%), fast high-pressure leaks | 0–100 %LEL |
| Hydrogen sulfide H₂S | Acid gas, sulphur recovery, sour-water stripper | Highly toxic | 0–100 ppm |
| Methane / syngas | Gasifier outlet, flare system | Explosion, asphyxiation | 0–100 %LEL |
| Oxygen O₂ | ASU, oxygen lines, confined spaces | Enrichment / deficiency | 0–30 %Vol |
Syngas and shift are CO problems; hydrotreating is H₂ IIC; ASU is oxygen enrichment and oil-free. One LEL sheet will miss a toxic or an oxidiser.