H-D03-0008-000 | RAEGuard 2 PID Instrument

H-D03-0008-000 is a RAE Hua Rui RAEGuard 2 PID instrument kit (FGM-200X, Flow-through, 1–1000 ppm, ATEX/IECEx). 10–28 VDC, 4–20 mA and RS-485 Modbus, magnetic-wand service. This range disables correction factors and relays.

English-list hub: product-9019. China-list hub: product-8017. Each part number has a single HTML file.

H-D03-0008-000 Kit, RAEGuard 2 PID, ATEX/IECEx, 1 – 1000 ppm isobutylene equivalent,Flow-through Note: Correction factors and relays are not available for this detection range
RAEGuard 2 PID · H-D03-0008-000

Part-number decode

SegmentMeaningThis SKU
FamilyRAEGuard 2 PID / FGM-200XH
TypeInstrument / accessory / consumable / spareInstrument
English-list groupInstrument / Accessories / Consumables & SparesInstrument
ModelFGM-2001 / FGM-2002FGM-200X
SamplingDiffusion / Flow-throughFlow-through
Range0.01–100 / 0.1–1000 / 1–1000 ppm1–1000 ppm
ApprovalATEX/IECEx, UL, Russia, ChinaATEX/IECEx
This SKUKit, RAEGuard 2 PID, ATEX/IECEx, 1 – 1000 ppm isobutylene equivalent,Flow-through Note: Correction factors and relays are not available for this detection rangeH-D03-0008-000

Technical specifications

CategoryRAEGuard 2 PID instrument kit
ModelFGM-200X / Flow-through
ApprovalATEX/IECEx
GasVOC / TVOC,10.6 eV PID
Range1–1000 ppm
Resolution1 ppm
Power10–28 VDC,约 210 mA@24 V,< 5 W
Output4–20 mA + RS-485 Modbus + 三路继电器 30 VDC 2 A
Entry3/4″ NPT M
Mounting2″ pipe or wall
IngressIP65
Sensor moduleC01-0004-000

Why this part number

Order H-D03-0008-000 to lock range, sampling and approval: Kit, RAEGuard 2 PID, ATEX/IECEx, 1 – 1000 ppm isobutylene equivalent,Flow-through Note: Correction factors and relays are not available for this detection range. China D03-*-C00 kits are on product-8017.

What it mates with

H-D03-0008-000 belongs to Instrument. The kit includes the head and DigiPID.

Typical applications

Refineries, solvent recovery, coating, wastewater, power plants and ambient VOC monitoring.

Selection contrast

P/NTypeDescription
H-D03-0004-000InstrumentKit, RAEGuard 2 PID, ATEX/IECEx, 0.01 – 100 ppm isobutylene equivalent,Flow-through
H-D03-0005-000InstrumentKit, RAEGuard 2 PID, ATEX/IECEx, 0.1 – 1000 ppm isobutylene equivalent,Flow-through
H-D03-0009-000InstrumentKit, RAEGuard 2 PID, UL, 0.01 – 100 ppm isobutylene equivalent,Flow-through
H-D03-0010-000InstrumentKit, RAEGuard 2 PID, UL, 0.1 – 1000 ppm isobutylene equivalent,Flow-through
H-D03-0012-000InstrumentKit, RAEGuard 2 PID, UL, 1 – 1000 ppm isobutylene equivalent,Flow-through Note: Correction
H-D03-0004-R00InstrumentKit, RAEGuard 2 PID, Russia, 0.01 – 100 ppm isobutylene equivalent
H-D03-0005-R00InstrumentKit, RAEGuard 2 PID, Russia, 0.1 – 1000 ppm isobutylene equivalent

Family matrix

Installation and service

Mount H-D03-0008-000 on a 2″ pipe or wall, 3/4″ NPT M entries. Power 10–28 VDC. Sensor pointing down. Flow-through water trap on inlet IN. Two-point cal with isobutylene.

FAQ

Is H-D03-0008-000 an IR head?
No. It is a 10.6 eV PID. Host is flameproof; DigiPID is intrinsically safe.
Detection principle?
Photoionization PID at 10.6 eV — not IR, not catalytic.
Hazardous-area service?
DigiPID unplugs for off-line cal; follow site permits.
Vs RAEGuard 3?
RG2 PID is VOC; RG3 covers CAT/NDIR/EC toxic-O₂.
Diffusion vs Flow Through?
Do not mix weather/pretreatment/dryer kits; those are Flow Through only.

Documents

English datasheet · Combined Manual Rev H · TVOC gas table · product-9019 · product-8017

Availability and enquiry

Availability: Not in stock — orders accepted; lead time approx. 8 weeks. Quote full P/N H-D03-0008-000, gas/range and approval.

WhatsAppTop