This page focuses on product & technology selection for metallurgy applications with actionable Honeywell product guidance.
For metallurgy applications, detector selection should cover sensing principle, range, response time, hazardous area rating, ingress protection, and maintenance. High-temperature zones: Sensepoint high-temp or IR; general areas: catalytic LEL + electrochemical CO; O₂ monitoring at oxygen plants and confined-space entries.
| Scenario | Recommended solution | Notes |
|---|---|---|
| CO at holders/booster stations | Electrochemical CO detectors (e.g. Sensepoint XCD) | Choose 0–2000 ppm to cover early high-concentration leaks |
| Cast house / ladle areas | High-temperature detectors with heat shields, or extractive sampling | Standard detectors degrade quickly above 60 °C |
| Coke oven basements | Combined CO+H₂ placement; personal 4-gas monitors | Forced ventilation and testing before entry; continuous monitoring during work |
| Along gas pipelines | Open-path IR (combustible sections) + point CO | Line coverage is more economical across open stretches |
| Gas cleaning / desulfurisation | H₂S electrochemical detectors, corrosion-resistant housing | Choose IP66+ in acid mist and shorten calibration intervals |
Ex note: coke oven gas is hydrogen-rich, so areas are often classified for Group IIC — equipment gas group and temperature class must cover hydrogen.